☰ Menu

DINSE CONNECTORS - DINSE 25 / DINSE 35

These are the industry standard Dinse 25 and Dinse 35 used to connect TIG torches to your welding machine dependent on its functionality and the torch you are using. Refer to the charts below for the proper connector to match your machines setup.

Note: These connectors are for non-gas-thru dinse style machines—if you have any questions regarding which connector to purchase please call or email us for help.

DINSE 25 | DINSE 35
LINCOLN | MILLER | THERMAL ARC/TWECO | MT200-AC/DC

LINCOLN MILLER THERMAL ARC / TWECO CK WORLDWIDE
INVERTEC V155-S 25 MAXSTAR 150S 25 FABRICATOR 141i 25 MT200-AC-DS 35
V200T 35 200 35 181i 35
V250-S 35 300 35 211i 35
V350-PRO 35 350 35 252i 35
POWER MIG 210MMP i DYNASTY 200 35 ARCMASTER 185 35  
300 35 200 35
350 35 300 35
  SYNCROWAVE 250DX 35 THERMAL ARC 95S 25
350LX 35 161S 35
XMT 304 CC/CV 35 161STL 35
350 CC/CV 35 186i 35
  201TS 35

DINSE 25 | GAS COOLED
3/8-INCH | 9.5MM

TORCHES ORDER#
CK24, 80, 90, 100 SL2-25-24
CK9, 17, 130, 150, FL130, FL150, MR70 SL2-25
MT100, CKC150, CK210, TL210, CKA16 SL5-25
CK26, TL26 SL8-25

 

DINSE 35 | GAS COOLED
1/2-INCH | 12.8MM

TORCHES ORDER#
CK24, 80, 90, 100 SL2-35-24
CK9, 17, 130, 150, FL130, FL150, MR70 SL2-35
MT100, CKC150, CK210, TL210, CKA16 SL5-35
CK26, TL26 SL8-35
DINSE | GAS COOLED

DINSE 25 | WATER COOLED
3/8-INCH | 9.5MM

TORCHES ORDER#
CK18, 20, 24W, 25, 180, 200 SLWHAT-25
CKT200, CK230, CK300, TL300
CK510, CK24W, FL230, FL250
MR140, MT400, MT500

 

DINSE 35 | WATER COOLED
1/2-INCH | 12.8MM

TORCHES ORDER#
CK18, 20, 24W, 25, 180, 200 SLWHAT-35
CKT200, CK230, CK300, TL300
CK510, CK24W, FL230, FL250
MR140, MT400, MT500
DINSE | WATER COOLED